AMT Machine Fixator is a one stop solution for precise yet cost efficient installation of heavy machinery and equipments.

AMT Machine Fixators are available in two basic designs: bolt-through and bolt-on. The "bolt-through"design has a clearance hole for an anchor bolt to securely anchor machines to the floor or foundation. The "bolt-on" design comes with fasteners and is designed for free-standing installations. The "bolt-on" design also is available with a anti-skid rubber base version for vibration isolation.

AMT Machine Fixators are based on double wedge principle. This involves the use of two wedges to provide leveling, rather than one. Both wedges move towards or away from the loading centre symmetrically. Equalizing these forces around the center results in an absolute rigid and stable anchoring system. As there is equal load distribution through two lifting wedges, the force required to raise or lower a machine is halved, resulting in effortless and precision leveling.

AMT Series N neoprene mounts allow excellent attenuation of medium to high frequency vibration and noise generated from a wide range of motor driven machines particularly axial and centrifugal fans.

Series N mounts are used to isolate a wide range of equipment and can be bolted to equipment mounting holes with the supplied cap screw and washer. However it is not necessary to bolt these mountings to the floor on most installations. They can be used under flat bases that have no bolt holes in much the same manner as rubber pads. The mounting may be inverted so that the rectangular rubber covered steel base plate provides support over a large area.

AMT C series cushy foot mounts employ the well proven inclined rubber element design to achieve much higher deflections compared to simple rubber in compression devices and therefore superior isolation of low frequency vibration.

These mounts consists of two rubber sandwich pieces housed in specially designed robust iron casting. The mountings are protected against oil, physical & mechanical damages. AMT Cushy Foot Mounts give insulation against transverse, vertical and longitudinal stiffness, vibration & reduces transmission of vibrations, structure borne noise & shock from a wide range of rotating and reciprocating machineries. These mounts have very low natural frequencies and possess good lateral stability.